Total G Resource Page
To download the Total G Interface v2.00
(interface program between the Total G and your WINDOWS PC),
please click the Download button below.
*********NOTE*********
Uninstall any previous versions of the Total G software before installing version 2.00.
It will NOT uninstall itself or install over the older version.
************************
V2 Release Notes:
There have been several changes made for release V2. The most notable are listed below:
1. This version has an improved “Auto” pirouette mode. If you mechanically setup, Trim and CG the machine as described in the instructions we recommend now running the “Auto” Pir Comp for better pirouette performance.
2. We fixed a gain problem that occurs with some radios. The gain and stops could work incorrectly. Some people were fixing their issues by running the FC Gain in “Gview” mode. The flight control should now work well with all radios when using the Aux channel.
3. We changed the logic for general cyclic control. This gives a more linear feel. Related to this note you now set control limits during setup at 11 degrees maximum (instead of the old 14 degrees)
4. When you install this firmware, it will force a change in several parameters like rate and heading gains in the “Background Settings”. This was done because of the logic changes in the cyclic controls. Basically some of the numbers people were running with the old program might cause problems with this software. To prevent this, it now defaults to a safe level.
5. We added separate Response Match for aileron and elevator to make for more linear control response and stops on aileron and elevator.
Note - the Total G setup videos below are generally still correct. For exact setup numbers please defer to the full setup instructions. The video has not yet been updated for V2. But it is still about 98% correct and watching to learn how the Total G setup proceeds.
(PDF Reader Required)
Total G Interface Installation Quick Start Guide
(PDF Reader Required)
| Read through the Total G Instruction Manual in English! | Lea el manual de instrucciones del Total G en español! |
|
Open publication |
Open publication |
ENGLISH VERSION OF THE TOTAL G MANUAL IN PDF FORMAT
VERSIÓN ESPAÑOLA DEL MANUAL DEL TOTAL G EN FORMATO PDF
Physical Link to G-View 2 Instruction Manual
| Other Total G Downloads To Enjoy |